|
Nominal power measured at 13.8V continuously @ 4 Ohm :
|
2 x 75W RMS
|
|
Nominal power measured at 13.8V continuously @ 2 Ohm :
|
2 x 100W RMS
|
|
Power in bridged mode measured at 13.8V continuously @ 4 Ohm :
|
1 x 200W RMS
|
|
Signal/noise ratio :
|
> 100dB (A)
|
|
Damping factor at 4 Ohm :
|
> 500
|
|
Frequency response :
|
10Hz - 35kHz
|
|
Input impedance :
|
13 kOhms
|
|
Input sensitivity :
|
0.2 - 5V
|
|
High-pass filter :
|
50 - 150Hz (12dB/oct.)
|
|
Low-pass filter :
|
50 - 150Hz (12dB/oct.)
|
|
Maximum cross section of loudspeaker cables :
|
10mm2 - 7 AWG
|
|
Maximum cross section of power cables :
|
25mm2 - 3 AWG
|
|
Idle current :
|
0.8A
|
|
Protections :
|
- Short-circuit
- Continuous power
- Thermal overload
- Soft clipping
- Overvoltage
- Polarity reversal
|
|
Dimensions ( H x W x D) :
|
50 x 230 x 280mm (2 x 9 x 11")
|
|
Weight :
|
3.10kg (6.33Ibs)
|
