McIntosh MCC301M Power Amplifier: monoblock reference amplifier: MCC301M

The MCC301M consists of a power amplifier capable of 300 watts into 4 ohm speakers with less than 0.005% distortion. A peak output current of 50 amperes ensures that the MCC301M will successfully drive high quality loudspeakers, such as McIntosh, for a truly exciting sound experience.

MCC301M Power Amplifier Specifications

Power Output
300 watts into 4 ohm loads and 600 watts into 2 ohm loads is the minimum sine wave continuous average power output

Rated Power Band
20Hz to 20,000Hz

Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for a 2 or 4 ohm load

Dynamic Headroom
1dB

Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz

Sensitivity
0.5 Volts

A-Weighted Signal To Noise Ratio
105dB (1.5V)

One Band Equalizer
Center Frequency is variable from 40Hz to 2,000Hz, level variable ±12db, Q fixed at 2

Subsonic Filter
Selectable 20Hz or 28Hz (the slope is 18dB per octave)

Low Pass Filter
Adjustable from 40Hz to 120Hz with a slope of 24dB per octave

Subwoofer Output
Low Pass filtered at 200Hz with a 6dB per octave slope (level variable ±12dB when using optional McIntosh External Subwoofer Rotary Control)

Intermodulation Distortion
Maximum Intermodulation Distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz, with all channels operating is: 0.005% for a 2 or 4 ohm load

Input Impedance
12,000 ohms

Power Requirements
12 Volts DC, 2.5 amps (idle) - 50 amps (300 watts)

Dimensions
12.5 inches (31.8cm) wide, 3.0 inches (7.6cm) high, 13.7 inches (34.8cm) depth

Weight
14.7 pounds (6.7Kg) net, 17.5 pounds (7.9Kg) in shipping carton

for more of a detailed look at this amplifier, please refer to the link: MCC301M

Special Order only! Please allow 7-10 working days for delivery.