McIntosh MCC404 Power Amplifier: 4 channel reference amplifier: MCC404 amplifier

The McIntosh MCC404 may not have those famous blue meters under it's glass top plate, but it does have a potent 4-channel amplifier whose high quality construction and jaw dropping performance are pure McIntosh. Rated at 100 watt x 4, 20-20KHz, 0.005%THD, the MCC404 is powered by a highly regulated Pulse Width Modulated power supply. The amps are configurable as either a four, three, or two channel system. Bridging a pair of channel will provide an awesome 400 watts of power, also at 20-20KHz, 0.005%THD.

The fully discrete design has balanced noise cancelling inputs and a pass through for use with additional amplifiers. What kind of system would need additional amplifiers with this thing on-line? A built-in variable crossover lets you sort the music out to the various drivers, and selectable high and low pass filters keep the power focused in the appropriate operating ranges. A one-band equalizer with an adjustable center frequency helps to further tune your system.

MCC404 Power Amplifier Specifications

Power Output per Channel
100 watts into 4 ohm and 200 watts into 2 ohm loads is the minimum sine wave continuous average power output per channel all for channels operating.

Power Output Bridged
400 watts into 4 ohm loads is the minimum sine wave continuous average power output.

Rated Power Band
20Hz to 20kHz

Total Harmonic Distortion
Maximum total harmonic distortion at anh power level from 250 milliwatts to rated power output is:
0.005% for 4 ohm loads
0.005& for 2 ohm loads
0.007$ for Bridged Mode with 4 ohm loads

Dynamic Headroom
1dB

Frequency Response
+0, -0.25dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 50kHz

Sensitivity
0.5 Volts

Signal-to-Noise Ratio A-Weighted
105dB (1.5V)

One Band Equalizer
Center Frequency is variable from 40Hz to 2,000Hz, level variable +/- 12dB, Q fixed at 2

High Pass Filter
Variable from 5Hz to 5,000Hz, 12dB per octave

Low Pass Filter
Variable from 50Hz to 5,000Hz, 12dB per octave (24dB per octave in Bridged Mode)

Subwoofer Output
Low Pass filtered at 200Hz with a 6dB per octave slope (level variable +/- 12dB when using optional McIntosh external subwoofer rotary control)

Intermodulation Distortion
Maximum Intermodulation Distortion if instantaneous peak output er ahannel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20kHz, with all channels operating is:
0.005% for 4 ohm loads
0.007% for 2 ohm loads
0.007% for Bridged Mode with 4 ohm loads

Input Impedance
12,000 ohms

Power Requirements
12 Volts DC, 3.5 amps (idle) – 70 amps (100 watts)

Dimensions (H x W x D)
3" (7.6cm) x 12-1/4" (31.1cm) x 18-1/2 (46.7cm)

Weight
20.2 lbs. (9.2kg) net, 23.2 lbs. (10.5Kg) in shipping carton

for a more detailed look at this amplifier, please refer to the link: MCC404

Please allow 7-10 working days for delivery!