McIntosh MCC406M Power Amplifier: 6 Channel Reference Amplifier: McIntosh MCC 406M Amplifier

The MCC406M six-channel power amplifier offers 400 watts of combined power output with high current capability. It will drive any high quality loudspeaker system to its ultimate performance levels. Six power amp channels, four each capable of 50 watts and two capable of 100 watts with less than 0.005% distortion assure that you will not be underpowered! The fully discrete design features transient turn-on protection, multi-stage thermal protection, and regulated cooling fans. Of course, the legendary McIntosh fully complimentary double balanced configuration is also present.

Product Details: Specifications

Power Output Per Channel Channels 1 thru 4:

50 watts into 4 ohm loads or 100 watts into 2 ohm loads, is the minimum sine wave continuous average power output per channel all channels operating.

Channels 5 and 6:

100 watts into 4 ohm loads or 200 watts into 2 ohm loads, is the minimum sine wave continuous average power output per channel all channels operating.

Power Output Bridged Channels (1 and 2) or (3 and 4): 200 watts into 4 ohm loads, is the minimum sine wave continuous average power output with all channels operating.

Channels (5 and 6):

400 watts into 4 ohm loads is the minimum sine wave continuous average power output with all channels operating.

Rated Power Band

20Hz to 20,000Hz

Total Harmonic Distortion

Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is:

0.005% for 4 ohm loads

0.01% for 2 ohm loads

0.01% for Bridged Mode with 4 ohm loads

Dynamic Headroom

1dB

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz

+0, -3dB from 10Hz to 50,000Hz

Sensitivity

0.5Volts

A-Weighted Signal To Noise Ratio

105dB (1.5V)

High Pass Filter

Variable from 5Hz to 5,000Hz, 12 dB per octave

Low Pass Filter

Variable from 50Hz to 5,000Hz, 12 dB per octave (24 dB per octave in Bridged Mode for Channels 5 and 6)

Subwoofer Filter

Low Pass filtered at 200 Hz with a 6dB per octave slope

(level variable 12dB when using optional McIntosh External Subwoofer Rotary Control).

Intermodulation Distortion

Maximum Intermodulation Distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz, with all channels operating is:

0.005% for 4 ohm loads

0.01% for 2 ohm loads

0.01% for Bridged Mode with 4 ohm loads

Input Impedance

12,000 ohms

Power Requirements

12 Volts DC, 4.5 amps (idle) - 75 amps (4 ohm loads)

Dimensions

12-1/2 inches (31.1 cm) wide, 3 inches (7.6 cm)

high, 18-2/5 inches (46.7cm) depth

Weight

20.5 pounds (9.3 Kg) net, 23.5 pounds (10.6 Kg) in

shipping carton
 

for a more detailed look at this amplifier, please refer to the link: MCC406M

Special order only! Please allow 7-10 working days for delivery.