McIntosh MCC602TM Power Amplifier: 2 Channel reference amplifier: McIntosh MCC 602TM Push/Pull amplifier.

You know the electronics business has come a long way when you encounter a product like the McIntosh MCC602TM. Back in the Golden Days of home audio you might run into a massive stereo amplifier, built like a tank, gorgeous glass face plate with huge glowing blue meters, fully discrete, fully balanced, a classic push-pull capable of 300 watts per channel across 20 Hz to 20kHz with virtually no distortion (0.005%THD). But in car stereo?

It's a fact. The MCC602TM is just such a beast. Dual MOSFET PWM Regulated power supplies can pull that power from a battery rated at just 12-volts without shutting down everything else in your car or requiring a second deep cycle battery or alternator. You can even bridge this monster to produce 600 watts at the same bandwidth and distortion levels. With this kind of power you probably don't even need speakers. Just tape the speaker leads to your car door and the amp can shake the whole car. Current output is equally awesome and the system is stable even into 1 ohm.

MCC602TM Power Amplifier Specifications

Power Output Stereo
Minimum sine wave continuous average power output per channel, all channels operating is:
300 watts into 2 ohm load
300 watts into 4 ohm load
300 watts into 8 ohm load

Power Output Mono
Minimum sine wave continuous average power output per channel, all channels operating is:
600 watts into 1 ohm load
600 watts into 2 ohm load
600 watts into 4 ohm load

Rated Power Band
20Hz to 20,000Hz

Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for 2, 4 or 8 ohm loads (Stereo)
0.005% for 1, 2 or 4 ohm loads (Mono)

Dymanic Headroom
1dB

Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 50,000Hz

Sensitivity
1Volt balanced or unbalanced inputs

A-Weighted Signal To Noise Ratio
114dB (2V)

Intermodulation Distortion
Maximum Intermodulation Distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz, with all channels operating is:
0.005% for 2, 4 or 8 ohm loads (Stereo)
0.005% for 1, 2 or 4 ohm loads (Mono)

Input Impedance
15,000 ohms balanced or unbalanced inputs

Power Requirements
12 Volts DC, 3.5 amps (idle) - 100 amps (600 watts)

Dimensions
26-7/8 inches (68.3cm) wide, 12-1/2 inches (31.75cm) depth, 4-3/16 inches (10.64 cm) high

Weight
50.5 pounds (22.9 Kg)

for more of a detailed look at this amplifier please refer to the link: MCC602TM

special order only. Please allow 7-10 working days for delivery!